Welcome to Cool Results
  • HOUSTON, TX 77205
Blast Chillers

Did You Know These Types Of Refrigeration Services?

Refrigeration systems come in a wide range of sizes and types, each with advantages and disadvantages. Refrigerators require special care, and if you are in Houston, you should take this Houston Refrigeration Services for the best repairs and maintenance.

The most common refrigeration system is the absorption refrigerator, which uses a heat source to generate cold air. Absorption refrigerators are typically used in commercial settings as they are very efficient and can generate large amounts of cool air. Another type of refrigeration system is the compressor refrigerator, which uses a compressor to circulate coolant through coils. Compressor refrigerators are widely used in households as they are relatively inexpensive and easy to maintain. However, they are less efficient than absorption refrigerators and can be noisy. Let’s take a closer look into the types of refrigerator systems:

Evaporate Cooling Refrigeration System

This refrigerator has a special compartment where evaporation cools. When the refrigerator door opens, warm air enters the compartment and cools the food inside. The cooling effect is because the warm air has a lower evaporation rate than the cold air. As a result, the refrigerated air becomes cooler, and the food stays fresh longer. This evaporative cooling system is very efficient and can save energy costs. If you are looking for evaporate cooling refrigeration services in Houston, get in touch with us.

Mechanical Compression Refrigeration System

A mechanical compression refrigeration system uses a compressor to raise the pressure of the refrigerant. This increases the temperature of the refrigerant, which circulates through the coils in the fridge. The high pressure of the refrigerant vapor forces it through a narrow valve into a low-pressure chamber. As the refrigerant expands in this chamber, its temperature drops and cools the fridge’s air. The cooled air then circulates back into the fridge. The compressor must continuously cycle on and off to maintain a constant temperature.

Large commercial applications such as supermarkets and warehouses typically use Mechanical compression refrigeration systems. However, you can also use them in residential settings. If your mechanical compression refrigeration system needs work, get in touch with us for the best refrigeration services in Houston.

Absorption Refrigeration System

The absorption refrigeration system is a method of cooling that uses a heat source to power a chemical reaction. Water evaporates in the most common absorption system to create a concentrated ammonia solution. This solution then passes over a second chamber containing a weak solution of ammonia and water. The heat from the focused solution causes the diluted solution to evaporate, and as it does so, it cools the surrounding air. The cooled air is then circulated through the refrigerator to keep the contents cool.

The usage of Absorption refrigeration systems is not as common as other types of refrigeration, but they have several advantages. They are quiet, efficient, and do not require electricity to operate. Additionally, you can use them in applications where other forms of refrigeration would be impractical, such as in RVs or boats. We provide absorption refrigeration services in Houston, and are ready to help you out anytime!

Thermoelectric Refrigeration System

A thermoelectric refrigeration system uses the Seebeck effect to cool or heat an area. When you expose two dissimilar conductors to a temperature gradient, the Seebeck effect produces a voltage. When you expose the conductors to a heat source, one conductor becomes hot while the other becomes cold. This temperature difference creates a voltage difference between the two conductors. You can drive an electric current using the resulting voltage, which you can use to power a refrigeration system. Thermoelectric refrigeration systems are often used in portable coolers, as a 12V battery can power them. However, people also use them in industrial applications where a large amount of cooling is required.

We hope this article helped! If you are looking for refrigeration system services, look no further and reach out to us.

 

 

Call Now